Zy500-a600 roller press

Roll specification: φ 500 × 600mm

Effective width of roll surface: ≤ 550mm

Roller material: 9Cr3Mo (electroslag remelting)

Roll surface hardness: hrc67-68

Roll run out: ≤ 0.0015mm (detected on grinder)

Run out of roll installed circle: ≤ ± 0.002mm

Roll surface roughness: RA ≤ 0.2 μ M

Structural form: "mouth" type integral casting frame, integral base. Main bearing: four row cylindrical roller bearing for rolling mill, linear rolling speed: 1-14m / min (stepless speed regulation)

Maximum pressure between two rollers: 3000kN

Overall dimension of continuous rolling line: 3100 × 1300 × 2400mm